Complete Downstream Injector Kit
Hurry up, only 9 items left in stock.
- Free Shipping on Orders $149+
- Order by 2pm Pacific, Mon–Thu, and it ships same day. Flat-rate shipping: $8.95 under $50, $12.95 under $149
- FREE local pickup at Oregon City shop
Complete Downstream Injector Kit – General Pump 2.1mm | 3–5 GPM
Everything you need to start downstreaming chemicals with your pressure washer in one convenient, ready-to-install kit!
The Expert Power Wash Complete Downstream Injector Kit is an easy-to-use chemical injection system designed to simplify soap and detergent application with your pressure washer. Built around a 2.1mm General Pump brass downstream injector, this assembly allows you to draw cleaning solutions directly from a chemical tank or bucket and introduce them into your pressure washer's water flow without sending chemicals through the pump.
Whether you're cleaning houses, siding, driveways, commercial buildings, or other exterior surfaces, this downstream injector kit makes chemical application simple, convenient, and efficient.
With an 8-foot reinforced chemical pickup hose, 12-inch dropstick, chemical filter, and preinstalled male and female quick-connect fittings, your system is ready for straightforward plug-and-play installation.
What's Included?
Everything is assembled and ready for use with a compatible pressure washing system.
-
(1) General Pump 2.1mm Brass Downstream Injector – Designed for chemical injection with a recommended pressure washer flow rate of 3–5 GPM.
-
(1) 8 FT x 1/4" Clear Braided Chemical Hose – Reinforced, flexible chemical pickup tubing that connects the injector to your chemical supply.
-
(1) 12" Chemical Dropstick – Makes it easy to position your chemical pickup line inside a chemical tank or bucket.
-
(1) 1/4" Downstream Chemical Filter – Helps prevent debris and unwanted particles from entering the injector through the chemical pickup line.
-
(1) Male Quick-Connect Fitting – Provides a convenient connection to your pressure washing equipment.
-
(1) Female Quick-Connect Fitting – Allows for quick attachment to a compatible high-pressure hose connection.
No need to purchase each component separately. This complete downstream injector assembly is put together by Expert Power Wash for a convenient, ready-to-use chemical application setup.
Key Features & Benefits
Plug-and-Play Installation
Forget piecing together individual fittings, hoses, and chemical injection components. This kit comes assembled with male and female quick-connect fittings for easy installation between your pressure washer's unloader outlet and high-pressure hose.
Simply connect the injector assembly, place the chemical pickup line into your cleaning solution, and use a compatible low-pressure soap nozzle to begin downstream chemical application.
Trusted General Pump Brass Injector
At the heart of this kit is a 2.1mm General Pump brass downstream chemical injector, designed to introduce cleaning solutions into the water stream after the pressure washer pump.
The brass injector provides a durable, purpose-built component for professional pressure washing applications.
Keep Chemicals Out of Your Pressure Washer Pump
Downstream injection introduces cleaning chemicals after the pump, rather than pulling chemicals through the pump itself.
This helps reduce the risk of exposing sensitive pump components to detergents and other cleaning solutions.
Extra-Long 8-Foot Chemical Pickup Hose
The included 8 FT x 1/4" clear braided hose provides additional reach when positioning your chemical supply.
Instead of placing your cleaning solution directly beside the injector, the longer hose gives you more flexibility when working with buckets, tanks, and pressure washing equipment.
Convenient 12-Inch Chemical Dropstick
The 12-inch dropstick helps position your pickup line inside your chemical container, making it convenient to draw cleaning solutions without manually holding the hose in place.
Filtered Chemical Pickup
The included 1/4" downstream chemical filter helps keep debris out of the chemical pickup line, reducing the possibility of injector restrictions caused by contaminated cleaning solutions.
Product Specifications
| Specification | Details |
|---|---|
| Product Type | Complete Downstream Chemical Injector Kit |
| Brand | Expert Power Wash |
| Injector Manufacturer | General Pump |
| Injector Material | Brass |
| Injector Orifice Size | 2.1mm |
| Recommended Pressure Washer Flow | 3–5 GPM |
| Chemical Pickup Hose | 8 FT |
| Chemical Hose Diameter | 1/4" |
| Chemical Hose Type | Clear Braided |
| Chemical Dropstick | 12" |
| Chemical Filter | 1/4" Downstream Filter |
| Connections | Male & Female Quick Connect |
| Installation | Inline, After Unloader |
| Assembly | Preassembled, Ready to Install |
How to Install Your Downstream Injector Kit
Installation is straightforward on compatible pressure washing systems.
-
Turn off your pressure washer and release residual pressure. Always depressurize the system before disconnecting high-pressure fittings.
-
Locate the high-pressure outlet after your unloader. This is where the injector assembly will be installed.
-
Connect the injector assembly. Attach the male and female quick-connect fittings between the unloader outlet and your high-pressure hose, following the injector's marked water-flow direction.
-
Place the chemical pickup line into your solution. Position the 12-inch dropstick and filtered pickup line inside your chemical tank or bucket.
-
Start your pressure washer and select a low-pressure soap nozzle. The proper low-pressure setting allows the injector to create suction and draw chemical into the water stream.
-
Switch to your appropriate high-pressure rinse nozzle when finished applying chemicals. Higher downstream pressure generally stops the injector from drawing chemical, allowing you to rinse.
Important: A compatible low-pressure soap nozzle is needed for chemical injection to operate correctly. A soap nozzle is not included in the listed kit components.
Recommended Applications
This downstream chemical injector kit is an excellent addition to pressure washing equipment used for:
-
House washing and exterior siding cleaning
-
Residential and commercial pressure washing
-
Driveway and concrete cleaning
-
Building exterior washing
-
Fence and deck cleaning
-
General detergent and soap application
-
Other exterior cleaning applications where downstream chemical injection is appropriate
Always verify that the cleaning solution is suitable for your surface, equipment, and injector components.
Compatibility & Performance
The included General Pump 2.1mm downstream injector is recommended for pressure washers operating between 3 and 5 GPM.
While this assembly may physically connect to other downstream pressure washing systems with compatible fittings, actual chemical draw performance depends on water flow, operating pressure, nozzle selection, hose length, and overall equipment configuration.
For the best results, match the injector's orifice size to the flow rate of your pressure washer.
This injector kit is intended for conventional downstream chemical injection, not direct pump-fed chemical injection.
Frequently Asked Questions
What is a downstream injector?
A downstream injector is a pressure washer accessory that uses water flow and pressure differential to draw soap or cleaning solutions from a separate container into the water stream after the pressure washer pump.
Will this injector work with my pressure washer?
The 2.1mm General Pump injector is recommended for 3–5 GPM pressure washers. Other configurations may require a different injector size for reliable chemical draw. Confirm that your equipment also has compatible quick-connect fittings.
Does this kit come fully assembled?
Yes! Our downstream injector kit comes assembled with the injector, male and female quick connects, chemical pickup hose, dropstick, and filter for convenient installation.
Can I draw chemicals directly from a 5-gallon bucket or chemical tank?
Yes. The included 8-foot chemical hose and 12-inch dropstick allow you to place the chemical pickup line into a compatible chemical container.
Do I need a special nozzle to downstream chemicals?
Yes. A compatible low-pressure soap nozzle is typically required to activate the injector's chemical draw. Switching to a suitable high-pressure rinse nozzle generally stops chemical pickup.
Will my cleaning chemicals run through the pressure washer pump?
No. When installed correctly downstream of the pump and unloader, the injector introduces your cleaning solution after the pump.
Can I use this kit for professional house washing?
Absolutely. Downstream chemical injection is commonly used by professional pressure washing contractors for exterior cleaning and detergent application. Always follow chemical manufacturer instructions, observe appropriate dilution ratios, and verify material compatibility.
Why Buy from Expert Power Wash?
At Expert Power Wash, we specialize in professional pressure washing equipment, soft wash systems, replacement parts, and practical solutions for contractors.
Our Complete Downstream Injector Kit brings together the essential components of a chemical application system in one convenient assembly, saving you the hassle of purchasing and connecting each part individually.
Simple installation. Trusted General Pump components. Ready for your next cleaning job.
Get your Expert Power Wash Complete Downstream Injector Kit and make chemical application easier with your pressure washing setup.
About Expert Power Wash
Expert Power Wash is a family-owned pressure washing equipment shop in Oregon City, OR, run by Tim and Kristina. Before we built equipment, we ran our own pressure washing business for more than ten years — so the parts and chemicals on our shelves are the ones we trust on real jobs.
Our storefront stocks thousands of parts, chemicals and supplies, most in-stock orders ship the same day, and when you call 503-403-6185 you talk to people who have run this gear.
Shipping & Pickup
Orders placed by 2pm Pacific, Monday–Thursday, ship the same day from Oregon City, OR. Orders placed after 2pm on Thursday, or Friday through Sunday, ship the following Monday. Flat-rate shipping is $8.95 on orders under $50 and $12.95 on orders from $50 to $148.99. Orders of $149 or more ship free within the lower 48 states — some large items have their own shipping rate, shown at checkout.
FREE local pickup at our Oregon City shop, Monday–Thursday 8am–4pm.
Returns
Unused items in their original packaging can be returned within 30 days of delivery. A 20% restocking fee applies, and some items — like chemicals and cut-to-length hose — can't be returned. See our Return Policy for details.

