C-Tar Melt By EaCo Chem
Hurry up, only 5 items left in stock.
- Free Shipping on Orders $149+
- Ships same day from Oregon City, OR. Flat-rate shipping: $8.95 under $50 $12.95 under $149
- FREE local pickup at Oregon City shop
EaCo Chem C-Tar Melt Water Soluble, Non-Hazardous, Powerful Tar Melting Penetration
C-Tar Melt is a blend of water-soluble, non-hazardous ingredients that give exceptionally powerful penetration and softening action. Do not dilute the product with water; product action will be stopped with the application of water. It is biodegradable and will aid in the separation of the tar residue from the rinse water if you contain and store the runoff for a short period of time. The ingredients do not harm the skin, however skin will dry out if constantly exposed to the tar remover.
C-Tar Melt is safe for wood, metal, brick, and masonry surfaces, and will not raise the grain or cause discoloration of the surface on its own. This is a powerful penetrating system, so the best method of tar removal from a painted vehicle is by putting a small amount on a cloth and wiping. Some softening of the paint may occur (that will be stopped upon rinsing), but it is very important to always check the reaction before leaving C-Tar Melt on the surface.
Dilutions:
- C-Tar is always used undiluted.
Application Instructions:
-
For tar removal from painted vehicles:
1. Apply C-Tar Melt by putting a small amount on a cloth and wiping
2. Follow proper rinsing procedures -
For porous masonry:
1. Spray C-Tar Melt on the surface and allow to dwell for approximately 5 minutes.
2. Typically, two applications will provide better mechanical release than a single application.
3. Number applications and dwell times will vary depending on thickness of the coating to be removed.
4. Follow proper rinsing procedures.
Coverage Rates:
- Coverage rates will vary based on dilutions, porosity severity of stain, application method, and other factors. Proper testing will determine actual coverage rate.
Rinsing:
- Proper rinsing techniques determine the final look and quality of the job. A thorough rinse job is always recommended; however, our chemistry never requires flooding a wall.. C-Tar Melt can be rinsed using cold water and low pressure. Pressures that mark the surface should be avoided. When in doubt, follow the manufacturers recommended P.S.I. for the substrates.
- Do not use a zero-degree nozzle.
- Caution: Do not allow the product to dry on a surface. Keep rinsed off of glass at all times.
About Expert Power Wash
Expert Power Wash is built and operated by Tim and Kristina — a team passionate about giving
pressure washing professionals the best equipment available. Every skid is hand-built in Oregon City, OR, with a focus on quality, reliability, and ease of use in the field.
Our goal is to source 95% of the parts we use from the USA. We distribute across 24 states, Canada, and overseas — backing every unit with a lifetime warranty and personal customer support. We don't just sell equipment; we help you build a successful business with hands-on training and ongoing guidance
Shipping & Pickup
We recommend in-person pickup in Oregon City, OR — this includes a free 2-hour
hands-on training session so you leave confident operating your skid. Transport
shipping is also available and coordinated directly with you.
